Table of Contents
Advertisement
(2) Changing the belt loop length (entire length) and precautions to be taken
E
(3) Changing the belt loop length by the selection of the frame of the work clamp foot
G
When you press button
length) entry screen is displayed to allow you to change belt loop
D
length (entire length).
Enter the desired value with +/- button E . Then confirm your entry
with enter button
In the case you have changed the belt loop length
(entire length), the belt loop for each belt loop shape
changes in length of the finished dimensions. So, be
careful.
Belt loop shape
No.1
No.2
F
No.3
No.4
No.5
No.6 (semi-classic type)
No.7 (both-end roll type)
The belt loop dimensions/entire length is changed by changing the
frame of the work clamp foot (linear bartacking/zigzag bartacking).
When the frame of the work clamp foot is desired to be changed,
selection can be made at
feeding frame which is currently selected is displayed in G .
→ Refer to
�@-2-29. How to set the device�
– 39 –
D , the belt loop length (entire
F .
Finished length of belt loop to be changed
Belt loop length B
Belt loop length C
Belt loop length B
Belt loop length E
Belt loop length F
Belt loop length B
Belt loop length F
of the machine setting. The
,
p.91.
Advertisement
Table of Contents
