Table of Contents
Advertisement
In the case a multi-layered part of
the belt loop is detected
In the case the absence of a belt
loop is detected
M
5 Display on the panel concerning the belt-loop multi-lay-
ered part detection/no belt-loop detection
After the data has been fixed, when the belt loop is fed out
L
using this function, the belt loop status will be displayed on the
panel in the case the belt is judged to have a multi-layered part
or in the case when there is no belt loop. To reset the display
and return to the normal display (i.e. nothing is displayed),
remove the multi-layered part if there was a multi-layered part,
or replenish the belt loop if there was no belt loop, and press
the clear button L on the input screen.
M
L
– 51 –
Advertisement
Table of Contents
