I
C
E
2 Specifying the location of the command to be deleted
Specify the location of the command you want to delete by
means of 1-stitch backward button
button
D with the work clamp foot lowered.
You can also move the needle entry point to another one, be-
D
fore or after the current point, at which a thread tension com-
L
mand is set by means of
H
the needle entry point, press stop button
G
F
When you press "move to initial position" button
screen is closed and the LK unit sewing screen is displayed.
In the case the current needle entry point is located on the
thread tension command, command delete button
displayed.
3 Deleting the thread tension command
When you press command delete button
mand delete screen is displayed. When you press enter button
M , the command is deleted.
M
– 67 –
C or 1-stitch forward
E or
F . To stop moving
G .
L , the com-
H , the
L is