Winding A Bobbin; To Wind A Bobbin While The Sewing Machine Is Performing Sewing; To Wind A Bobbin Independently - JUKI AB-1351 Instruction Manual

5-2. Winding a bobbin

(1) To wind a bobbin while the sewing machine is performing sewing

(2) To wind a bobbin independently

A
In the case you only want to carry out bobbin winding
on the sewing machine, unthread the needle and re-
move the bobbin from the hook.
1 Displaying the bobbin thread winding screen
Press bobbin winding button
input screen (blue), and the bobbin winding screen appears on
the screen.
2 Starting bobbin winding
B
Press the start switch, and the sewing machine rotates to start
bobbin winding.
3 Stopping the sewing machine
Press stop button
returns to the normal mode. If you press the start switch again
during bobbin winding, the sewing machine stops under the
bobbin winding mode. If you press the start switch again in this
state, the sewing machine re-starts bobbin winding. Use this
operating procedure when you want to wind thread on two or
more bobbins.
The bobbin winding will not start immediately after
turning the power ON. To activate the bobbin winding
function, set a pattern number or the like first, then
press the set ready key
screen. In this state, the bobbin winding function is
enabled.
– 20 –
Thread the bobbin winder and wind the bobbin
thread onto the bobbin as illustrated in the figure.
B , and the sewing machine stops and
A on the belt loop data
to invoke the sewing