Table of Contents
Advertisement
2-22. How to change the thread tension command from needle entry point to needle entry point
(1) How to add/change the thread tension command from needle entry point to needle entry point
A
I
C
E
1 Displaying the thread tension command change screen
Press thread tension button
when you select a user pattern to display the thread tension
setting screen. When you press thread command change but-
ton
B on the thread tension setting screen, the thread
tension command change screen is displayed.
If the start switch is pressed, the work clamp foot will be low-
ered.
In this mode, the sewing machine will not start even if
you press the start switch.
B
2 Specifying the location of the command to be changed
Specify the location to which a new thread tension command
you want to add, or at which the current thread tension com-
mand value you want to change by means of 1-stitch back-
ward button
the work clamp foot lowered.
You can also move the needle entry point to another one, be-
D
fore or after the current point, at which a thread tension com-
H
mand value is set by means of
G
F
moving the needle entry point, press stop button
When you press return-to-origin button
closed and displays the LK unit sewing screen.
The values shown on the screen are absolute values (thread
tension value + Thread tension command value).
– 65 –
A on the sewing screen
C or 1-stitch forward button
E or
D with
F . To stop
G .
H , the screen is
Advertisement
Table of Contents
