Table of Contents
Advertisement
2-5. How to change over the sewing shape
A
B
D
1 Display the belt loop individual sewing data entry screen
Only on the belt loop individual sewing data entry screen (blue),
changeover of the sewing shape is enabled. On the sewing
screen of the belt loop individual sewing (green), press the set
ready key
entry screen (blue).
2 Bring up the sewing shape selection screen
Press sewing shape button
selection screen is displayed.
3 Select the type of sewing shape and confirm your entry
The following seven different sewing shapes are available.
Select a desired one from among them. Select a desired type
of sewing shape by pressing one of sewing shape selec-
tion buttons B which corresponds to the desired type. Then,
press enter button
selected is confirmed and the screen returns to the belt loop
individual sewing data entry screen.
Pictograph
C
4 Basting stitch
In the case the belt loop shape No. 6 (semi-classic type) is
selected, basting stitch can be set.
Press basting stitch button
�@-2-18. How to select the sewing shape
Refer to
→
(bartacking setting)�,
– 37 –
to display the belt loop individual sewing data
A , and the sewing shape
C , and the sewing shape you have
Name
Belt loop shape No. 1
Belt loop shape No. 2
Belt loop shape No. 3
Belt loop shape No. 4
Belt loop shape No. 5
Belt loop shape No. 6 (Semi-classic type)
Belt loop shape No. 7 (Both-end roll type)
D to carry out setting.
p.61.
Advertisement
Table of Contents
