Table of Contents
Advertisement
No.
Thread clamp control can be prohibited
Normal
�eed motion timing is selected
Set the timing in "-" direction when stitch is not
well-tightened.
Bobbin winding speed can be set
Thread breakage detection selection
Thread breakage
detection invalid
Number of invalid stitches at the start of
sewing of thread breakage detection
Number of invalid stitches at the end of sewing
of thread breakage detection
Language selection
Japanese
Spanish
Portuguese
Indonesian
Grease-up error clear
Clearing of number of stitches of grease-up is
performed.
→ Refer to
�#-1-16. Replenishing the desig-
nated places with grease�, p.131.
Grease run-out error clear
Number of belt-loops to be sewn with grease run-
out state is cleared.
→ Refer to
�#-1-16. Replenishing the desig-
nated places with grease�, p.131.
Item
Prohibited
Thread breakage
detection valid
English
Chinese
(traditional)
Italian
French
Turkish
Vietnamese
Russian
– 90 –
Input range/
selection range
―
−8 to 16
800 to 2000
―
0 to 15
(stitches)
0 to 15
(stitches)
―
Chinese
(simplified)
German
Korean
―
―
Initial
value
Normal
0
1600
Valid
8
3
English
―
―
Advertisement
Table of Contents
