Explanation Of The Lk-1902B, Computer-Controlled High-Speed Belt-Loop Attaching Machine; Specifications; Preparation Of The Sewing Machine; Threading The Machine - JUKI LK-1900BN Series Instruction Manual

III. EXPLANATION OF THE LK-1902B, COMPUTER-CONTROLLED
HIGH-SPEED BELT-LOOP ATTACHING MACHINE

1. SPECIFICATIONS

Different specifications from those of the LK-1900BN only are described.
1 Max. sewing speed
2 Needle
3 Lift of the work clamp foot
4 Number of standard patterns

2. PREPARATION OF THE SEWING MACHINE

2-1. Threading the machine

WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
❶
3,000 sti/min
DPx5 #14, #16
Max. 17mm
6 patterns
Thread the machine in the order as illustrated in the
left figure. Leave thread of approximately 40 mm af-
ter passing through the needle.
－ －
82
For a thick thread, pass the thread
through only one of the two holes in nee-
dle bar thread guide ❶ .