Table of Contents
Advertisement
5. Operating the sewing machine
5-1. Emergency stop switch
(1) Method for operating the emergency stop switch
1
(2) Precautions with the emergency stop switch
When emergency stop switch 1 stays ON, the sewing machine cannot be powered up even if you turn
ON/OFF the power switch. The work clamp foot of the sewing machine may depress the loop clamp or
the belt loop loosening rod according to the operation timing of emergency stop switch 1 . If this phe-
nomenon occurs, turn OFF the power to the sewing machine and manually lift the work clamp foot of
the sewing machine to move it so as to avoid interference. Then, re-turn ON the power to the sewing
machine.
Emergency stop switch 1 is mounted on the up-
per left section of the sewing machine head.
Emergency stop switch 1 is turned ON by strong-
ly pressing in the red button. It is turned OFF by
turning it counterclockwise.
If you turn ON emergency stop switch 1 while the
machine is in operation, the power is turned OFF
to cause the machine to stop operation.
I f y o u t u r n O � � e m e r g e n c y s t o p
switch 1 with the power switch re-
mained ON, the power is re-turned
ON. Take care of abrupt re-turn ON of
the power.
To turn OFF the power for any purpose other than
an emergency stop, operate the power switch.
– 19 –
Advertisement
Table of Contents
