Non-Interactive Mode Commands - Qlogic SANsurfer iSCSI HBA CLI User Manual

5
Non-Interactive Mode
Commands
Use non-interactive commands in scripts and similar applications to configure
QLogic QLA4xxx iSCSI HBAs and the storage connected to them. If you prefer to
work with the HBA from a menu-based system, use Interactive mode commands
instead (for details, see
The command format for non-interactive mode is:
iscli [optional parameters] <Command Option> [Command Variable] |
[Command Variable]
Where:
SN0054621-00 E
Section 4 Interactive Mode
<> = Parameters in angled brackets are required.
[] = Parameters in square brackets are optional.
| = OR operator.
Italicized text = Placeholder describing the command variable.
Commands).
5-1