Removing Sansurfer Iscsi Hba Cli; Microsoft Windows Uninstall; Start Menu Uninstall; Control Panel Uninstall - Qlogic SANsurfer iSCSI HBA CLI User Manual

2 – Installation and Removal

Removing SANsurfer iSCSI HBA CLI

Removing SANsurfer iSCSI HBA CLI
To remove SANsurfer iSCSI HBA CLI from your system, follow the instructions that
that correspond to your OS:
"Microsoft Windows Uninstall" on page 2-12
"Red Hat/SUSE Linux/PPC Uninstall" on page 2-13
"Solaris SPARC/Solaris x86 Uninstall" on page 2-13

Microsoft Windows Uninstall

The Windows OS offers the following methods of uninstalling SANsurfer iSCSI HBA
CLI:
"Start Menu Uninstall" on page 2-12
"Control Panel Uninstall" on page 2-12
"Command Line Uninstall" on page 2-12

Start Menu Uninstall

On the Windows Start menu, point to All Programs > QLogic Management
Suite > SANsurferiCLI, and then click Uninstall SANsurferiCLI.

Control Panel Uninstall

Follow these steps to uninstall SANsurfer iSCSI HBA CLI using the Windows
Control Panel.
To uninstall from the Control Panel:
1. On the Start menu, click Control Panel.
2. Click Add/Remove Programs.
3. Select SANsurferiCLI.
4. Click Change/Remove.

Command Line Uninstall

You can uninstall SANsurfer iSCSI HBA CLI from the command line. Select
interactive, passive, or silent uninstall.
To uninstall interactively from the command line:
Enter the following from a command prompt:
SANsurferiCLI.msi
To uninstall passively from the command line:
Enter the following from a command prompt:
msiexec /x SANsurferiCLI.msi
2-12
S
SN0054621-00 E