Display Send Targets - Qlogic SANsurfer iSCSI HBA CLI User Manual

A
Select the Target Discovery Menu option to view the HBA Target Discovery
Menu containing the following options:
1. Display Send Targets (see
2. Display Discovered Targets (see
3. Add a Send Target (see
4. Mark Send Target for re-discovery (see
5. Remove a Send Target (see
6. Login and persist a discovered target (see
7. Duplicate a Persistent Target (see
8. Duplicate a Discovered Target (see
9. Remove Discovered Target (see
10. Display iSNS Settings (see
11. Configure iSNS (see
12. Save changes and reset HBA (if necessary) (see
13. Select HBA Port (see
14. Refresh (see
15. Exit (see

Display Send Targets

Select the Display Send Targets option to view a list of send targets in the
SANsurfer iSCSI HBA CLI database, as well as the persistent send targets in the
HBA database.
Display Discovered Targets
Select the Display Discovered Targets option to view a list of discovered targets
in the SANsurfer iSCSI HBA CLI database.
Add a Send Target
Select the Add a Send Target option to add a new send target to either the
SANsurfer iSCSI HBA CLI database or the HBA database. You must save your
changes before send targets are discovered. When you are prompted to make the
target persistent, respond yes to add the target to the HBA database and log in
the targets. For the added target to be discovered, you must use the Save
Target/CHAP Settings option (see
Mark Send Target for Re-discovery
Select the Mark Send Target for Re-discovery option to have SANsurfer iSCSI
HBA CLI discover send targets when you select the Save Target/CHAP Settings
option (see
SN0054621-00 E
page
page
page
page 4-49)
page 4-50)
page 4-47).
4 – Interactive Mode Commands
Port Level Info & Operations Menu
page 4-45)
page 4-45)
4-45)
page
page 4-46)
page 4-46)
page 4-46)
page 4-46)
page 4-46)
4-46)
4-49)
page 4-47).
4-45)
page 4-46)
page 4-18)
4-45