Dspchap (Display A Chap Table); Dtdsp (Display Discovered Targets); Dtdspa (List Targets); Dtdupd (Duplicate A Discovered Target) - Qlogic SANsurfer iSCSI HBA CLI User Manual

A
-dr <hba_port_inst>
For information on the interactive version of this command,
Router List (IPv6) (CLI Option -dr)" on page
-dspchap
(Display a CHAP Table)
To view the CHAP table, enter the -dspchap command as follows:
-dspchap <hba_port_inst>
For information on the interactive version of this command, see
Table (CLI Option -dspchap)" on page
-dtdsp
(Display Discovered Targets)
To view the discovered targets that are not persistent, enter the -dtdsp
command as follows:
-dtdsp <hba_port_inst>
For information on the interactive version of this command,
Targets" on page
-dtdspa
(List Targets)
To view discovered targets, including persistent and non-persistent, enter the
-dtspa command as follows:
-dtspa <hba_port_inst>
For information on the interactive version of this command,
Option -t)" on page
-dtdupd
(Duplicate a Discovered Target)
To duplicate a discovered target that is not persistent, enter the -dtdupd
command as follows:
-dtupd <hba_port_inst> <target_instance>
To obtain the target instance, use the command
Targets)" on page
A duplicate target is assigned a new iSCSI initiator ID (ISID) and can then be used
to create a redundant path.
For information on the interactive version of this command,
Discovered Target" on page
SN0054621-00 E
4-41.
4-45.
4-37.
5-9.
4-46.
5 – Non-Interactive Mode Commands
Non-interactive Commands
"Display Default
4-33.
"Display CHAP
"Display Discovered
"List Targets (CLI
"-dtdsp (Display Discovered
"Duplicate a
5-9