Error Codes; Interactive Mode Error Codes - Qlogic SANsurfer iSCSI HBA CLI User Manual

D

Error Codes

This appendix provides the error codes for both CLI modes, interactive and
non-interactive.

Interactive Mode Error Codes

Table D-1
code.
NOTE:
The return codes in this table are sorted numerically for ease of use.
Table D-1. Interactive-Mode Error Code Descriptions
Return
0 CORE_STATUS_GOOD
100 CORE_ERR_INV
101 CORE_ERR_MEM_FAIL
102 CORE_ERR_SDM_FAIL
103 CORE_ERR_NO_HBA
104 CORE_ERR_HBAOPEN
105 CORE_ERR_SAVE_INITFW
106 CORE_ERR_HBARESET
107 CORE_ERR_RO_PARAM
108 CORE_ERR_MISSING_PARAM
109 CORE_ERR_FWUPD
110 CORE_ERR_INVFILE
SN0054621-00 E
lists the return, name, and description for each interactive mode error
Name Description
Success
Invalid parameter: use -h switch to see proper
usage.
Failed to allocate memory error.
A call to the SDM Library failed.
HBA instance specified is invalid.
Failed to open the HBA for an operation.
Failed to save the INITFW settings to the HBA.
Failure resetting the HBA.
Cannot change a read-only parameter.
A required parameter was missing.
An error occurred updating the firmware.
The file name entered is invalid or does not
exist.
D-1