Dc (Display Destination Cache [Ipv6 Only]); Dce; Defbidi (Add A Default Bidi Chap); Delchap (Delete A Chap Entry) - Qlogic SANsurfer iSCSI HBA CLI User Manual

A
For information on the interactive version of this command, see
Driver, All Adapters (CLI Option -d)" on page
-dc
(Display Destination Cache [IPv6 only])
The IPv6 destination cache contains the IP address, next-hop IP address, and
path MTU information about both local and remote destinations. For multicast and
on-link unicast destinations, the next-hop IP address always matches the
destination IP address. For unicast destinations that are off-link, the next hop IP
address is the IP address of the router.
To display the destination cache, enter the -dc command as follows:
-dc <hba_port_inst>
For information on the interactive version of this command, see
Destination Cache (IPv6) (CLI Option -dc)" on page

-dce

To display the connection error logs for up to 100 latest connections, enter the
-dce command as follows:
-dce <hba_port_inst> <target_id> <filename>
If <hba_port_inst> and <target_id> are not specified, all entries for all HBA
ports will be displayed. If <filename> is specified, then the log will be written to
that file.
-defbidi
(Add a Default BIDI CHAP)
To add a default BIDI (bidirectional) CHAP entry to the specified HBA port, enter
the -defbidi command as follows:
-defbidi <hba_port_inst> <CHAP Secret>
Issuing this command resets the HBA.
For information on the interactive version of this command, see
BIDI CHAP (CLI Option -defbidi)" on page
-delchap
(Delete a CHAP Entry)
To delete the specified CHAP entry, enter the -delchap command as follows:
-delchap <hba_port_inst> <CHAP>
Issuing this command resets the HBA.
For information on the interactive version of this command,
(CLI Option -delchap)" on page
SN0054621-00 E
5 – Non-Interactive Mode Commands
4-11.
4-33.
4-43.
4-44.
Non-interactive Commands
"Install HBA
"Display
"Add a Default
"Delete a CHAP Entry
5-7