Hba Level Info & Operations Menu (Cli Option -I); Hba Information (Cli Option -Ch) - Qlogic SANsurfer iSCSI HBA CLI User Manual

4 – Interactive Mode Commands
HBA Level Info & Operations Menu (CLI Option -i)
HBA Level Info & Operations Menu
(CLI Option -i)
The HBA Level Info & Operations Menu provides the following options for each
HBA port instance:
1. HBA Information (see
2. HBA Options Menu (see
3. HBA Reset (see
4. HBA Diagnostic Menu (see
5. HBA Level Parameters Menu (see
6. Display VPD Information (see
7. Select HBA Port (see
8. Refresh (see
9. Exit (see
On each submenu, save the changes by typing the number for Save changes
and reset HBA, and then pressing ENTER. This saves your changes and resets
all ports on the HBA.
To update the firmware with these changes, type the number for Refresh, and
then press ENTER. If you do not select this option, your changes will not be visible
in SANsurfer iSCSI HBA CLI.
HBA Information
(CLI Option -ch)
When you select the HBA Information option, information is listed for the working
adapter; for example:
Board Type
Chip Model
Chip Version
Serial Number
MAC Address
Driver Version
Firmware Version
ROM Version
iSCSI Version
BIOS/UEFI Version
BIOS/UEFI Full Version
4-12
page 4-12)
page 4-13)
page 4-14)
page
page 4-49)
page 4-49)
page 4-50)
: QLE4060C
: ISP4032
: 0
: QS40620A00034
: 00-C0-DD-08-97-40
: 2.1.4.18 (STOR w32)
: 3.0.1.45
: 1.0.0.0
: 0.20
: 1.00
: 1.00
4-15)
page 4-17)
page 4-18)
S
SN0054621-00 E