Subscribe to Our Youtube Channel
Related Manuals for Qlogic 200 Series
Summary of Contents for Qlogic 200 Series
-
Page 1: Quick Start Guide
Quick Start Guide Host Bus Adapter Installation 200, 2300, 2400, and 2500 Series FC0054505-01 C... -
Page 2: Document Revision History
QLogic Corporation reserves the right to change product specifications at any time without notice. Applications described in this document for any of these products are for illustrative purposes only. QLogic Corporation makes no representation nor warranty that such applications are suitable for the specified use without further testing or modification. -
Page 3: Table Of Contents
Table of Contents Introduction Supported Host Bus Adapters ........Additional Resources . - Page 4 Quick Start Guide—Host Bus Adapter Installation 200, 2300, 2400, and 2500 Series FC0054505-01 C...
-
Page 5: Introduction
Introduction This guide provides details on how to install and configure your new QLogic Host Bus Adapter, including installing the adapter hardware, adapter driver, and ® QConvergeConsole , the QLogic Web management utility. It also lists the Host Bus Adapters covered, provides additional resources, and describes warranty details. -
Page 6: Additional Resources
User’s Guide QConvergeConsole CLI (2400, 2500, 2600, 3200, 4000, 8100, 8200, 8300 Series) (part number SN0054667-00). Warranty The following sections contain additional information about the QLogic Host Bus Adapter laser safety, agency certification, and product safety compliance. For warranty details, see the QLogic Web site: http://www.qlogic.com/Support/warranty.aspx... -
Page 7: Agency Certification
Warranty Agency Certification The following sections contain a summary of EMC/EMI test specifications performed on the QLogic Host Bus Adapters to comply with radiated emission, radiated immunity, and product safety standards. EMI and EMC Requirements FCC Part 15 compliance: Class A (QLE236x, QLA24xx, QLA2xx, QLE2464,... - Page 8 For QLA2310F, QLA2340, QLA2342, QLE236x, QLA24xx, QLE2xx, QLE2464, QLE25xx, and QOE2562 Host Bus Adapters: Korea Class A Certified Product Name/Model: Fibre Channel Host Bus Adapter Certification holder: QLogic Corporation Manufactured date: Refer to date code listed on product Manufacturer/Country of origin: QLogic Corporation/USA A class equipment...
-
Page 9: Product Safety Compliance
Korean Language Format—Class A For QLE24xx and QLA2xx adapters: Korea MIC Class B Certified Product Name/Model: Fibre Channel Host Bus Adapter Certification holder: QLogic Corporation Manufactured date: Refer to date code listed on product Manufacturer/Country of origin: QLogic Corporation/USA B class equipment... - Page 10 1–Introduction Warranty TUV for QLA23xx, QLE236x, QLA24xx, QLE24xx, QLA2xx, QLE2xx, QLE2464, QLE25xx: EN60950-1:2001 EN60825-1:1994+A1+A2 EN60825-2:1994+A TUV for QOE2562: TUV EN60950-1:2006+A11+A1+A12 2nd Edition TUV IEC 60950-1:2005 2nd Edition Am 1:2009 CB FC0054505-01 C...
-
Page 11: Installation
Installation This chapter describes how to install and configure the QLogic Host Bus Adapter in three simple steps: Step 1. Install the Hardware Step 2. Install the Adapter Driver ® Step 3. Install QConvergeConsole Step 1. Install the Hardware To install the adapter hardware, you need to open the computer and locate the appropriate bus slot. -
Page 12: Installing The Qoe2562 Adapter
2–Installation Step 1. Install the Hardware Pull out the slot cover (if any) by removing the screw or releasing the lever. Install the low-profile bracket (if required). Grasp the adapter by the top edge and seat it firmly into the appropriate slot (see Figure 2-1). -
Page 13: Step 2. Install The Adapter Driver
Plug in the power cable and turn on the computer. Step 2. Install the Adapter Driver Drivers for QLogic Host Bus Adapters are available per adapter model, protocol, and OS. Ensure that adapter drivers are always updated to the latest version. -
Page 14: Step 3. Install Qconvergeconsole
Follow the driver installation instructions in the Read Me document. Step 3. Install QConvergeConsole QLogic QConvergeConsole tools provide easy management of QLogic Fibre Channel, Intelligent Ethernet, and Converged Network Adapters within SANs. The QConvergeConsole management suite includes a browser-based GUI, a ®... -
Page 15: Adapter Leds
Adapter LEDs This appendix explains the meaning of the LEDs for each of the supported adapters. Table A-1. QLA2310 and QLA200 Host Bus Adapter LED Scheme Green LED Yellow LED Activity Power off Power Online Link Flashing Loss of synchronization Green and yellow LEDs Firmware error flashing alternately... - Page 16 A–Adapter LEDs Table A-3. QLA24xx and QLE24xx Host Bus Adapter LED Scheme Yellow LED Green LED Amber LED Activity Power off Power on (before firmware initializa- tion) Flashing Flashing Flashing Power on (after firmware initialization) Yellow, green, and amber LEDs Firmware error flashing alternately On and...
- Page 17 A–Adapter LEDs Table A-4. QLE25xx Host Bus Adapter LED Scheme (Continued) Yellow LED Green LED Amber LED Activity (8Gbps) (4Gbps) (2Gbps) On and Online, 2Gbps link/I/O activity flashing On and Online, 4Gbps link/I/O activity flashing On and Online, 8Gbps link/I/O activity flashing Flashing Flashing...
- Page 18 QLogic Corporation. PCI Express and PCI-X are registered trademarks of PCI-SIG Corporation. All other brand and product names are trademarks or registered trademarks of their respective owners. Information supplied by QLogic Corporation is believed to be accurate and reliable. QLogic Corporation assumes no responsibility for any errors in this...
Need help?
Do you have a question about the 200 Series and is the answer not in the manual?
Questions and answers