Hba-Level Parameters; A-2 Hba Settings - Qlogic SANsurfer iSCSI HBA CLI User Manual

A – Port- and HBA-level Parameters

HBA-level Parameters

HBA-level Parameters
Table A-2
both configurable and non-configurable (read-only), use the -ch option in
non-interactive mode. To edit configurable parameters, use the -nh option in
non-interactive mode.
NOTE:
The parameters in this table are sorted alphabetically for ease of use.
Parameter
HBA_Alias
HBA_Default_Fragment_
Reass_Timeout
HBA_Delayed_ACK
HBA_Reserved_TCP_
Config
HBA_TCP_MAX_
Window_Size
A-10
lists the HBA parameters and their values. To view all HBA parameters,
Table A-2. HBA Settings
Value
Character string
40 to 600 (units are
1/10 secs)
on or off
(Request assistance
from QLogic Support)
4096 to 65535
Alias
HBAALIAS HBA alias name. Symbolic name
you assign to the HBA for identifi-
cation purposes.
HBADFRT For QLE406x HBAs only. Default
value for the IP Fragment Reas-
sembly Timeout.
HBADELACK For QLE406x HBAs only. Deter-
mines what occurs when the HBA
receives a Data-In PDU with the
final bit set and no status reported.
When on, the HBA immediately
sends a TCP acknowledgment
(this is the default value). When
this parameter is off, the HBA
delays the acknowledgment and
waits for more data.
HBARTCPC For QLE406x HBAs only. A
parameter with control bits for vari-
ous TCP algorithms in the firm-
ware. Do not modify without
instruction of valid configuration
values provided by QLogic.
HBATCPMWS The maximum TCP Receive Win-
dow size in bytes.
S
Description
SN0054621-00 E