Edit Configured Port Settings Menu; Display Configured Port Settings (Cli Option -C); Change Port Iscsi Alias Name (No Cli Option) - Qlogic SANsurfer iSCSI HBA CLI User Manual

4 – Interactive Mode Commands
Port Level Info & Operations Menu

Edit Configured Port Settings Menu

To edit the configured HBA settings:
1. Specify the HBA port whose settings you want to view or change by typing
the number for Select HBA Port, and then pressing ENTER.
SANsurfer iSCSI HBA CLI lists all iSCSI HBA ports.
2. Type the number for the HBA port whose settings you want to change, and
then press ENTER.
3. For the selected HBA port, select from the following options:
1. Display Configured Port Settings (see
2. Change Port iSCSI Alias Name (see
3. Port Firmware Settings Menu (see
4. Legacy 4010 Restore Default Port Settings (see
5. Select HBA Port (see
6. Save changes and reset HBA (if necessary) (see
7. Refresh (see
8. Exit (see
4. For each submenu, save the changes by typing the number for the Save
changes and reset HBA option, and then pressing ENTER. This saves your
changes and resets all ports on the HBA.
5. To update the firmware with these changes, type the number for the Refresh
option, and then press ENTER. If you do not select this option, your changes
will not be visible in SANsurfer iSCSI HBA CLI.
Display Configured Port Settings
(CLI Option -c)
When you select this option, all of the firmware parameters and their values are
displayed for the HBA port. For a description of the firmware settings, refer to
Appendix A Port- and HBA-level
Change Port ISCSI Alias Name
(No CLI Option)
NOTE:
This command is only available in interactive mode.
The HBA port alias is a symbolic name you assign to the HBA for identification. To
assign an alias, type the name at the prompt. The name can have between 0 and
255 characters, and must be terminated with at least one NULL character.
4-22
page 4-49)
page 4-49)
page 4-50)
Parameters.
page 4-22)
page 4-18)
page 4-18)
page
page
SN0054621-00 E
S
4-28)
4-18)