Memory Operation; Memory Channels; Memory Channel Selection; D UsNg The [∫]/[√] Keys - Icom IC-7600 Instruction Manual

6

MEMORY OPERATION

■ Memory channels

The transcever has 101 memory channels. The
Memory mode s very useful to quckly change to
often-used frequences.
MEMORY
CHANNEL
Regular memory
channels
Scan edge
memory
channels

■ Memory channel selection

D Using the [∫]/[√] keys
q Push [VFO/MEMO] to select the memory mode.
w Push [∫]/[√] several tmes to select the desred
memory channel.
• Push and hold [∫]/[√] for contnuous scrollng.
• [UP] and [DN] on the mcrophone can also be used.
e To return to VFO mode, push [VFO/MEMO] agan.
D Using the keypad
q Push [VFO/MEMO] to select the memory mode.
w Push [F-INP ENT].
e Enter the desred memory channel number usng
the keypad.
• Enter 100 or 101 to select scan edge channel P1 or P2,
respectvely.
r Push [∫] or [√] to set the memory channel.
[EXAMPLE]
To select memory channel 3;
- Push [F-INP ENT], [7 3], then push [∫] or [√].
To select memory channel 12;
- Push [F-INP ENT], [1.8 1], [3.5 2], then push [∫] or
[√].
To select the scan edge channel P1;
- Push [F-INP ENT], [1.8 1], [50 0], [50 0], then push
[∫] or [√].
To select the scan edge channel P2;
- Push [F-INP ENT], [1.8 1], [50 0], [1.8 1], then push
[∫] or [√].
99
MEMORY
CHANNEL CAPABILITY
NUMBER
One frequency and one mode n each
1–99
memory channel.
One frequency and one mode n each
P1, P2 memory channel as scan edges for
programmed scan.
All 101 memory channels are tunable, whch means
the programmed frequency can be tuned temporarly
wth the man dal, etc. n memory mode.
TRANSFER
TO VFO
Yes
Yes
OVER-
CLEAR
WRITING
Yes Yes
Yes No
VFO/MEMO
Keypad
F-INP
ENT
VFO/MEMO