D FLter Shape Set Mode - Icom IC-7600 Instruction Manual

D Filter shape set mode
The type of DSP flter shape for SSB, SSB data and
CW can be selected ndependently from soft and
sharp.
q Push and hold [FILTER] for 1 sec. to select the fl-
ter set screen.
w Push and hold [SHAPE] (F-6) for 1 sec. to select
the flter shape set mode.
w Select the desred tem usng [Y] (F-1) or [Z] (F-2).
e Rotate the man dal to select the flter shape from
soft and sharp.
• Push and hold [DEF] (F-4) for 1 sec. to select a default
value.
t Push [EXIT/SET] to ext flter shape set mode.
HF SSB (600Hz – )
Select the flter shape for the SSB mode n HF
bands.
SSB-D (600Hz – )
Select the flter shape for the SSB data mode n HF
bands.
CW ( – 500Hz)
Select the flter shape for the CW mode n HF
bands.
CW (600Hz – )
Select the flter shape for the CW mode n HF
bands.
50M SSB (600Hz – )
Select the flter shape for the SSB mode n 50 MHz
band.
SSB-D (600Hz – )
Select the flter shape for the SSB data mode n
50 MHz band.
CW ( – 500Hz)
Select the flter shape for the CW mode n 50 MHz
band.
CW (600Hz – )
Select the flter shape for the CW mode n 50 MHz
band.
RECEIVE AND TRANSMIT
• Filter shape set mode
SHARP
The set filter shape s automatcally used only
when the IF filter s set to 600 Hz or wder.
SHARP
The set filter shape s automatcally used only
when the IF filter s set to 600 Hz or wder.
SHARP
The set filter shape s automatcally used only
when the IF filter s set to 500 Hz or narrower.
SHARP
The set filter shape s automatcally used only
when the IF filter s set to 600 Hz or wder.
SOFT
The set filter shape s automatcally used only
when the IF filter s set to 600 Hz or wder.
SHARP
The set filter shape s automatcally used only
when the IF filter s set to 600 Hz or wder.
SHARP
The set filter shape s automatcally used only
when the IF filter s set to 500 Hz or narrower.
SHARP
The set filter shape s automatcally used only
when the IF filter s set to 600 Hz or wder.
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
78