■ Daily timer setting
TIMER1
TIMER2
TIMER3
F-1
F-2
F-3
F-2
TIMER
TIME
• Timer set mode screen
• During [Timer1] is selected
F-1
F-2
F-4
CLR
TIMER4
TIMER5
SET
F-4
F-5
F-6
Main dial
F-4
EXIT/SET
F-6
SET
CLOCK AND TIMERS
The transcever turns power ON and/or OFF automat-
cally on the specfed day and tme, wth the specfed
frequency settngs.
q Push [EXIT/SET] several tmes to close mult-func-
ton screen, f necessary.
w Push [SET] (F-6) to select the set mode menu
screen.
e Push [TIME] (F-4) to select the tme set mode.
r Push [TIMER] (F-2) to select the tmer set mode.
t Push one of [TIMER1] (F-1) to [TIMER5] (F-5) to
select the desred tmer.
y Rotate the man dal to select the tmer acton ON
or OFF.
u Push [≈] (F-2) to select the "DAY" cell, then rotate
the man dal to select the desred day of the week.
• Select "– – –" not to specfy the day of the week. The
tmer wll functon every day n ths case.
• Once a day of the week s selected, push [CLR] (F-4)
to select "– – –."
i Push [≈] (F-2) to select the "REPEAT" cell, then
rotate the man dal to select the repeat functon
ON or OFF.
• ON : The tmer functons every selected day of
the week (repeats).
• OFF : The tmer does not repeat.
o Push [≈] (F-2) to select the "ON" cell, then rotate
the man dal to set the desred transcever power
ON tme.
• When usng power OFF tmer only, push [CLR] (F-4)
to select "– – – –." Ths settng cannot be set when the
power OFF tmer s set to "– – – –."
!0 Push [≈] (F-2) to select the "OFF" cell, then rotate
the man dal to set the desred transcever power
OFF tme.
• When usng power ON tmer only, push [CLR] (F-4) to
select "– – – –." Ths settng cannot be set when the
power ON tmer s set to "– – – –."
!1 Push [≈] (F-2) to select the "Mch" cell, then rotate
the man dal to select the desred memory channel
number.
• If usng the currently set VFO condton, push [CLR] (F-4)
to select "– – –."
!2 Push [SET] (F-6) to set the tmer.
• The tmer ndcator appears.
!3 Repeat steps t to !2 to set other tmers, f desred.
!4 Push [EXIT/SET] to ext tmer set screen.
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
116
Need help?
Do you have a question about the IC-7600 and is the answer not in the manual?