Hcf Control - Ricoh EMP 156 User Manual

HCF Control

The HCF Control page is displayed when you select HCF Control if optional HCF is
installed.
You can select "Normal Pick Mode" or "Prior Pick Mode".
Normal Pick Mode
When the tray is switched from a standard tray (Tray 1 or 2) to the HCF, paper
begins feeding from the HCF tray after the last sheet is fed from the standard
tray.
In this mode, there is an interval between last sheet fed from the standard tray
and first sheet fed from the HCF.
Prior Pick Mode
When the tray is switched from the standard tray to the HCF tray, the printer
starts to feed a paper from the HCF tray before feeding a paper from the
standard tray if the data processing of the paper fed from the HCF has
completed.
The paper fed from the HCF tray stops at the HCF exit and is fed continuously
after last paper fed from the standard tray.
The tray switching time is shortened at Prior Pick Mode is shorter than
Normal Pick Mode.
However, more papers may be wasted than Normal Pick Mode when paper
jam or an error occurred.
Also, there are some limitations when using this mode.
page 5-6
The settings on this page reflect what is set on the Operator Control Panel. If you make
changes to this page and click the Submit button, the changes will be reflected on the
Operator Control Panel.
Figure 6-20. System Tray (4)
for detail.
"Printing Notes" on
Web Utilities 6-25