Ricoh EMP 156 User Manual page 66

7. If the paper size you have loaded is a standard size, set the Custom Size Switch to
the Standard position. If the paper size you have loaded is a non-standard or a
custom size, set the Custom Size Switch to the Custom position.
NOTE
Standard paper sizes are shown in the table
Paper Types and Paper Color" on page
8. Gently close the Tray.
NOTE
A Paper Height Error (E0BB, E0BD, E0BF, E0C1, E0C3 or E0C5) may be
caused if there is paper deformation such as curl, waving or folding. In
this case, remove the deformed paper from the Tray.
9. If you are loading paper for the first time or the paper has changed from the
previous type, set the paper weight. Refer to
page
10.If the paper size you have loaded is a non-standard size, see
Standard Paper Size" on page
3-12 Paper Handling
Figure 3-11. Loading Paper in Tray (7)
:
:
3-19.
"Paper Sizes, Paper Weights,
3-3.
"Setting the Paper Weight Value" on
3-15.
"Setting a Non-