Setting A Non-Standard Paper Size - Ricoh EMP 156 User Manual

Setting a Non-Standard Paper Size

If the paper size you have selected is a non-standard size, you must set the paper size
using the OCP. First, follow the steps for loading paper into the desired tray, then
perform these steps.
1. Before closing the tray, set the Custom Size Switch located in the tray to the
"Custom" position.
Figure 3-12. Setting the Non-Standard Paper Size (1)
2. To display the Paper Size screen, making the following selection on the OCP:
Printer / Paper Source / Paper Size
Figure 3-13. Setting the Non-Standard Paper Size (2)
Paper Handling 3-15