Ricoh EMP 156 User Manual page 247

Specifications
Base Printer
Design and specifications are subject to change without notice.
Imaging Method
Exposure System
Image Resolution
Warm-up Time
Continuous Print Speed in
Simplex mode
Printable Area
Guaranteed Printing Area
Controller
Memory Capacity
Maximum Monthly Print Vol-
ume
Nominal Voltage
Nominal Frequency
Power Consumption
(Standard Configuration)
Noise Level *
Operating Temperature and
Humidity
Recommended Operating
Temperature and Humidity
Dimensions
(Standard Configuration)
Weight
Product Life
* Maschinenlärminformations-Verordnung - 3. GPSGV, 06.01.2004:
Der höchste Schalldruckpegel beträgt 70dB(A) oder weniger gemäß EN ISO7779
A-2 Printer Specifications
Item
Electro-Photography.
Semiconductor 4 laser beam (laser diode) scanning.
600 x 600 dots per inch (dpi).
Less than 300 seconds after sleep mode at room
ambient 68
Up to 156 pages per minute (ppm) A4/Letter/Legal
(LEF).
Full size of the paper.
Inside area of following boundaries;
5mm from the leading edge of paper
5mm from the side edge of the paper
8mm from the trailing edge of the paper
Embedded controller with PowerPC 750FX 800MHz.
256MB
Up to 4,500,000 prints (A4/Letter)
200/208/220/230/240/380/400/415 V (3-Phase)
50 Hz or 60 Hz.
4.6kW (Average)
70 dBA in operation.
60 dBA in standby.
Temperature range: 60° to 90°F (16° to 32°C).
Humidity range: 20-80% RH (no condensation).
Temperature range: 66.2° to 77°F (19° to 25°C).
Humidity range: 40-60% RH (no condensation).
2169 x 1350 x 1105mm (H x W x D).
860kg.
90,000,000 images or 5 years, whichever comes first.
Specification
o o
F (20 C).