Ricoh EMP 156 User Manual page 172

Message
Paper Skew Tray 2
Remove Paper E171
Post Device Full Remove
Paper E011
Post Device Mixed Paper
E0D0
Post Device Not Ready
E067
Regist Cover Open
Close Cover E055
Sample Tray Full
Remove Paper E010
Suspended Task
Toner Bag Full
Replace Toner Bag E012
Toner Bag Not Set
Set Toner Bag E030
Toner Low
Add Toner E013
Transfer Belt End of Life
Replace Transfer Belt E029
Transit Path Front Cover Open
Close Cover E058
Transit Path Paper Guide Open
Close Cover E05D
Tray 1 Open
Close Tray E040
Tray 1 Paper Height Error
Reload Paper E0BB
Tray 1 Size Mismatch
Load xxx E0BA
Tray 2 Open
Close Tray E041
Tray 2 Paper Height Error
Reload Paper E0BD
Tray 2 Size Mismatch
Load xxx E0BC
CAUTION
If the message "Open the Fuser cover, and check that there is no paper" is
displayed on the OCP with E31x Call for Service error, open the Fuser
cover and check the Fuser unit. Refer to Chapter 4.
5-22 Troubleshooting
Description
Paper Jam in Tray 2.
Post Device is Full
The different sized paper is already
stacked in the Post Device
Post Device is not ready
Regist Cover is opened.
Sample Tray is full.
There is processing which execution
has suspended.
Toner Bag is full.
Toner Bag is not seated properly.
Print quality will diminish until toner is
replenished.
Transfer Belt needs to be replaced.
Transit Path Front Cover is opened.
Transit Path Paper Guide is opened.
Tray 1 is opened.
Paper height in Tray 1 is incorrect.
Incorrect paper size is loaded in Tray
1. xxx is the paper size.
Tray 2 is opened.
Paper height in Tray 2 is incorrect.
Incorrect paper size is loaded in Tray
2. xxx is the paper size.
!
Corrective Action
Remove the jammed paper.
If the jam recurs, refer to
Printing Problems" on page
Remove the paper from the Post
Device
Remove the paper from the Post
Device
Turn the Post Device to Ready
Close the Regist Cover.
Remove the paper from Sample Tray.
Touch to return to Ready status.
Replace the Toner Bag.
Reseat the Toner Bag.
Supply toner.
Contact your authorized Service
Technician.
Close the Transit Path Front Cover.
Close the Transit Path Paper Guide.
Close the Tray 1.
Refer to "General Printing Problems"
on page 5-4.
Load requested size paper in Tray 1.
Close the Tray 2.
Refer to "General Printing Problems"
on page 5-4.
Load requested size paper in Tray 2.
"General
5-4.