Configuration-Ipds Map - Ricoh EMP 156 User Manual

Configuration - IPDS Map
The Manage>Configuration>IPDS Map page has three buttons: Tray Map, Bin Map, Tray Offsets.
Tray Map
Selecting the Tray Map page allows mapping of IPDS input tray numbers to physical input trays.
Label
Identifies the physical input trays [e.g., Tray 1-2, HCF1 (lower
Input Tray
upper), HCF2 (lower, upper)]
IPDS Tray Selects the IPDS tray number that maps to the corresponding
Number physical tray number
An example of Input Tray mapping by physical tray are shown below:
Default mapping:
Physical Input Tray
Tray 1
Tray 2
HCF1 Upper
HCF1 Lower
HCF2 Upper
HCF2 Lower
Figure 6-48. Configuration-IPDS Map-Tray Map
Tray Map
Action
IPDS Tray No.
0
1
2
3
4
5
Cascade mapping (see next
Physical Input Tray
Tray 1
Tray 2
HCF1 Upper
HCF1 Lower
HCF2 Upper
HCF2 Lower
Allowable Entries
N/A
0 to 254
page):
IPDS Tray No.
0
1
1
3
4
5
Web Utilities 6-61