Ricoh EMP 156 User Manual page 46

Level 1 Level 2
Printer Paper Source
Paper Output
Options
PostScript
Test Print
PCL
Note 1: This menu is displayed only when the additional Stacker is installed.
Note 2: This menu is displayed only when the HCF is installed.
Note 3: This menu is displayed only when the Halftone Selection in the Service menu is
enabled.
Note 4: This menu is available only when the Transit Pass Unit Type 156 is installed..
2-18 Control Panels
Table 2-3. Printer Menu Structure - Continued
Level 3
Paper Moisture 1
2
HCF1 Lower
(Note 2)
HCF1 Upper
(Note 2)
HCF2 Lower
(Note 2)
HCF2 Upper
(Note 2)
HCF Tray Control Normal Pick Mode
Prior Pick Mode
(Note 2)
Default Output Container 1 Lower
Container 1 Upper
(Note 1)
Container 2 Lower
(Note 1)
Container 2 Upper
(Note 1)
Pass Through (Note 4)
Finishing (Note 4)
Stacking Level 1 Lower :Short
1 Lower :Long
1 Upper :Short
1 Upper :Long
2 Lower :Short
(Note 1)
2 Lower :Long
(Note 1)
2 Upper :Short
(Note 1)
2 Upper :Long
(Note 1)
Wait Timeout 0-999 seconds
LPD Queuing Enable/Disable
Duplex-Always Enable/Disable
Print Density Light/Semi-Light/Mid-
dle/Semi-Dark/Dark
Auto Proof Sample 0, 500, 1,000, 1,500,
2,000, 2,500, 3,000,
3,500, 4,000, 4,500,
5,000
Cover Insert Mode
Cover Insert/Bypass
(Note 4)
Print Errors Enable/Disable
Best Fit Enable/Disable
Job Timeout 0 second or
15-999 seconds
Halftone Density
Light/Medium/Dark
(Note 3)
Cross Pattern
Select Paper Source
Raster Pattern Select Paper Source
Wide A4 Enable/Disable
Requested Tray Exclusively/First
Level 4 Level 5
Highest/Higher/
Normal/Lower
Highest/Higher/
Normal/Lower
Highest/Higher/
Normal/Lower
Highest/Higher/
Normal/Lower
Highest/Higher/
Normal/Lower
Highest/Higher/
Normal/Lower
100%/75%/50%
100%/75%/50%
100%/75%/50%
100%/75%/50%
100%/75%/50%
100%/75%/50%
100%/75%/50%
100%/75%/50%
Select Paper
Destination
Select Paper
Destination
Level 6