Ricoh EMP 156 User Manual page 105

3. Tilt the CF Case toward the Air System side.
4. Pull out the Fine Filter to remove it
Figure 4-36. Replacing the Fine Filter (3)
:
NOTE
Attach the seal supplying with the new Fine Filter onto the opening of the
Fine Filter to prevent spilling toner.
5. Set the new Fine Filter into the CF Case.
6. Close the CF Door.
7. Close the SF Cover.
8. Place the old Fine Filter in a polyethylene bag and properly dispose of it.
:
NOTE
When the OCP displays "Fine Filter End of Life", the printer cannot print
until the filter is replaced.
.
Care and Maintenance 4-21