Table of Contents
Advertisement
Energy Save Time
Can be set to enable or disable. Defines the waiting time (in minutes) to enter
Energy Save Mode when Energy Save Mode is enabled.
Password
Use to change the System password. The system password is used by your System
Administrator and provides access to the system parameters.
Auto Online
Can be set to enable or disable. When set to enable, the printer automatically
returns from offline to an online status within 7 minutes after the last OCP
operation in offline state. When set to disable, the printer will remain in an offline
status until the "resume/online" button is pressed.
Public R/W
Enable allows read/write when SNMP community name is Public.
Auto Backup Time
Defines start time of auto backup. Valid range is 0 - 23 (hours in military time). A
system data backup will be performed if the printer is on at the set time.
Output Cascade
Cascade Priority
Defines the switching priority of the Container Stacker when auto cascading.
Cascade on CS Open
Defines the behavior when the open switch on the Container Stacker is
pressed while auto cascading. When set to "Stop", printer stops printing.
When set to "Continue" the printer switches the stacker and continues to print.
Control Panels 2-21
Advertisement
Table of Contents
Troubleshooting
