Table of Contents
Advertisement
Options
The Options page contains additional printer parameters that you can modify. After
making the desired changes, click Submit to update the settings.
Auto Feed Direction
When enabled, if the requested paper feed direction is not present in any tray, the
printer will select an alternative paper feed direction for the same paper size. This
function applies to A4 and Letter size only.
Exit Jam Recovery
Can be set to enable or disable. When set to enable, the printer will reprint pages
that were improperly printed due to a paper jam.
Wait Timeout
Defines the waiting period (in seconds) from reception of last data to the
reception of next data. If data is not received within the defined period, the job is
terminated.
PDL Memory Size
Sets the PDL memory size, except PostScript, as a percentage of the total system
memory.
Print Density
Print Density can be adjusted to five settings: Light, Semi-Light, Middle,
Semi-Dark or Dark.
6-20
Web Utilities
Figure 6-16. System-General Options
Advertisement
Table of Contents
Troubleshooting
