Table of Contents
Advertisement
12.Remove the paper by pulling horizontally and to the right, then close the Fuser
Unit Cover.
Figure 4-66. Clearing Paper from the Paper Feed Area (12)
WARNING!
The Fuser Unit is very hot. Do not touch any part of the Fuser Unit except
those necessary to remove the paper. Use the Bamboo Tweezers (located in
the Accessory Box) to remove the paper.
:
NOTE
Always pull the paper from the Fuser horizontally. If the paper is pulled
out an angle, the Heat Roller may be contaminated with toner which can
degrade the print quality.
Always pull out the paper to the right. If the paper is pulled to the left, the
Fuser Web may be wrapped around the Heat Roller.
Care and Maintenance 4-35
Advertisement
Table of Contents
Troubleshooting
