Table of Contents
Advertisement
Harmonized (<HAR>), Rated min. 300V/25A (with grounding plug).
WARNING!
The printer must be connected to the grounding power outlet for safe and
proper operation.
Apparatet må kun tilkoples jordet stikkontakt.
Apparaten skall ansulatas till jordat uttag när den ansluts till ett nätverk.
Für einen sicheren und ordnungsgemäßen Betrieb muß der Drucker an
eine geerdete Steckdose angeschlossen werden.
Do not attempt to rework, pull, bend, chafe, or otherwise damage the power cord.
Do not place a heavy object on the cord.
Never touch a power cord with wet hands.
If your printer produces smoke, excessive heat, unusual noises or odors, or if any
liquid is spilled into the printer, immediately switch off and unplug the printer.
If the power cord is broken or insulated wires are exposed, be sure to get them
replaced. (Do not use the damaged cord.)
CAUTION
Never unplug or replug the printer while it is on.
When unplugging the printer, grasp the plug instead of the cord.
Be sure to switch off and unplug the printer before accessing its interior for
cleaning or maintenance.
When the printer is not used over an extended period of time, switch it off and
unplug it.
Once a month, unplug the printer and check that:
the power cord is plugged firmly into a receptacle.
the power cord is not cracked or frayed.
the plug is not excessively heated, rusted, or bent.
the plug and receptacle are free of dust.
:
NOTE
If you notice any unusual conditions, contact your service representative.
Appendix C-6Safety Information
!
Advertisement
Table of Contents
Troubleshooting
