Table of Contents
Advertisement
B – Command Line Interface
CIMSubscription Command
CIMSubscription Command
Creates, edits, or removes CIM subscriptions.
Authority
Admin session and a CIM Edit session. Refer to the
page B-11
Syntax
cimsubscription
create [subscription_name]
delete [subscription_name]
edit [subscription_name]
Keywords
create [subscription_name]
Prompts you in a line-by-line fashion to create a CIM subscription with the name
given by [subscription_name]. [subscription_name] can have up to 32 characters:
0-9, A-Z, a-z, _, $, ^, and -.
parameters.
Parameter
Name
FilterID
EnabledState
Duration
delete [subscription_name]
Deletes the subscription given by [subscription_name] from the CIM database.
edit [subscription_name]
Opens an editing session in which you can modify the CIM subscription given by
[subscription_name]. Refer to
configuration parameters.
B-14
for information about opening a CIM edit session.
Table B-4
Table B-4. CIM Subscription Configuration Parameters
Subscription name.
Event type for which the switch monitors and sends an indication
to the CIM client. The event types are as follows:
CreateComputerSystem – A switch is added to the fabric.
This is the default.
ModifyComputerSystem – A switch state change.
DeleteComputerSystem – A switch is removed from the
fabric.
CreateFCPort – Not supported.
ModifyFCPort – A Fibre Channel port state change.
DeleteFCPort – Not supported.
Enable (True) or disable (False) the subscription. The default is
True.
Subscription life span in seconds. The subscription life span
begins when the subscription is created. Expired subscriptions
do not send indications to the CIM client though they remain in
the CIM database. Values can be 1–720000. 0 indicates
indefinite, which is the default.
Table B-4
"CIM Command" on
describes the CIM subscription configuration
Description
for a description of the CIM subscription
0
59042-08 A
Advertisement
Table of Contents
