Qlogic SANbox2-8c Installation Manual page 215

0
Examples
The following is an example of the Show Log Component command:
SANbox2 #> show log component
Current settings for log
------------------------
FilterComponent
The following is an example of the Show Log Level command:
SANbox2 #> show log level
Current settings for log
------------------------
FilterLevel
DisplayLevel
The following is an example of the Show Log Options command:
SANbox2 #> show log options
Allowed options for log
-----------------------
FilterComponent
All,None,NameServer,MgmtServer,Zoning,Switch,Blade,Port,Eport,Snmp
FilterLevel
DisplayLevel
The following is an example of the Show Log command:
SANbox2 #> show log
[327][day month date time year][I][Eport Port:0/8][Eport State=
E_A0_GET_DOMAIN_ID]
[328][day month date time year][I][Eport Port: 0/8][FSPF PortUp state=0]
[329][day month date time year][I][Eport Port: 0/8][Sending init hello]
[330][day month date time year][I][Eport Port: 0/8][Processing EFP, oxid= 0x8]
[331][day month date time year][I][Eport Port: 0/8][Eport State = E_A2_IDLE]
[332][day month date time year][I][Eport Port: 0/8][EFP,WWN= 0x100000c0dd00b845,
len= 0x30]
[333][day month date time year][I][Eport Port: 0/8][Sending LSU oxid=0xc:type=1]
[334][day month date time year][I][Eport Port: 0/8][Send Zone Merge Request]
[335][day month date time year][I][Eport Port: 0/8][LSDB Xchg timer set]
[336][day month date time year][I][Eport Port: 0/8][Setting attribute
Oper.UserPort.0.8.EpConnState Connected]
59042-08 A
NameServer MgmtServer Zoning Switch Blade Port Eport Snmp
Info
Critical
Critical,Warn,Info,None
Critical,Warn,Info,None
B – Command Line Interface
Show Log Command
B-107