Table of Contents
Advertisement
B – Command Line Interface
CIMListener Command
CIMListener Command
Configures CIM indication service listeners and adds subscriptions to listeners.
Refer to the
configuring subscriptions.
Authority
Admin session and a CIM Edit session. Refer to the
page B-11
Syntax
cimlistener
add [listener_name] [subscription_list]
create [listener_name]
delete [listener_name]
edit [listener_name]
Keywords
add [listener_name] [subscription_list]
Adds the set of subscriptions given by [subscription_list] to the listener given by
[listener_name]. Use a <space> to delimit subscription names in
[subscription_list].
create [listener_name]
Prompts you in a line-by-line fashion to create a CIM listener with the name given
by [listener_name]. [listener_name] can have up to 32 characters: 0-9, A-Z, a-z, _,
$, ^, and -. The CIM listener configuration parameters are described in
Parameter
Name
Type
URL
delete [listener_name]
Deletes the listener given by [listener_name] from the CIM database.
edit [listener_name]
Opens an editing session in which you can modify the CIM listener given by
[listener_name]. Refer to
configuration parameters.
B-12
"CIMSubscription Command" on page B-14
for information about opening a CIM edit session.
Table B-3. CIM Listener Configuration Parameters
Listener name
Listener type:
Permanent – S
whether a connection can be established or not. This
is the default.
Transient – Sends indications to
ceases if a connection cannot be established after 60
minutes.
IP address of the CIM client and the port number to which to
send indications. The default is 10.0.0.1:5000.
Table B-3
for information about
"CIM Command" on
Description
end indications to the CIM client
the CIM client, but
for a description of the CIM listener
0
Table
B-3.
59042-08 A
Advertisement
Table of Contents
