Table of Contents
Advertisement
0
services
Prompts you in a line-by-line fashion to enable or disable switch services.
Table B-24
new value or press the Enter key to accept the current value shown in brackets.
Note:
TelnetEnabled
SSHEnabled
GUIMgmtEnabled
SSLMgmtEnabled
59042-08 A
describes the switch service parameters. For each parameter, enter a
Use caution when disabling TelnetEnabled and GUIMgmtEnabled; it is
possible to disable all Ethernet access to the switch.
Table B-24. Switch Services Settings
Entry
Enables (True) or disables (False) the ability to manage
the switch over a Telnet connection. Disabling this
service is not recommended. The default is True.
Enables (True) or disables (False) Secure Shell (SSH)
connections to the switch. SSH secures the remote
connection to the switch. To establish a secure remote
connection, your workstation must use an SSH client.
The default is False.
Enables (True) or disables (False) out-of-band
management of the switch with SANsurfer Switch
Manager, the SANsurfer Switch Manager Application
Application Programming Interface, SNMP, and CIM. If
this service is disabled, the switch can only be managed
inband or through the serial port. The default is True.
Enables (True) or disables (False) secure SSL
connections for management applications including
SANsurfer Switch Manager, the SANsurfer Switch
Manager web applet, SANsurfer Switch Manager
Application Programming Interface, and the CIM server.
The default is False.
To enable secure SSL connections, you must first
synchronize the date and time on the switch and
workstation.
This service must be enabled to authenticate users
through a RADIUS server.
Enabling SSL automatically creates a security
certificate on the switch.
To disable SSL when using a user authentication
RADIUS server, the RADIUS server authentication
order must be local.
B – Command Line Interface
Set Setup Command
Description
B-79
Advertisement
Table of Contents
