Table of Contents
Advertisement
2 – General Description
Fibre Channel Ports
2.2.1
Port LEDs
Each Fibre Channel port has its own Logged-In LED and Activity LED as shown in
Figure
2-5.
2.2.1.1
Port Logged-In LED
The Logged-in LED indicates the logged-in or initialization status of the connected
devices. After successful completion of the POST, the switch extinguishes all
Logged-In LEDs. Following a successful loop initialization or port login, the switch
illuminates the corresponding logged-in LED. This shows that the port is properly
connected and able to communicate with its attached devices. The Logged-In
LED remains illuminated as long as the port is initialized or logged in. If the port
connection is broken or an error occurs that disables the port, the Logged-In LED
will flash. Refer to
about the Logged-In LED.
2.2.1.2
Port Activity LED
The Activity LED indicates that data is passing through the port. Each frame that
the port transmits or receives causes this LED to illuminate for 50 milliseconds.
This makes it possible to observe the transmission of a single frame. When
extending credits, the Activity LED for a donor port will reflect the traffic of the
recipient port. Refer to
extended credits and donor ports.
2-6
Logged-In
Activity LED
LED (Green)
(Green)
Figure 2-5. Port LEDs
"Logged-In LED Indications" on page 5-5
"Distance" on page 3-4
for more information
for more information about
0
59042-08 A
Advertisement
Table of Contents
