Table of Contents
Advertisement
0
5.
Select option 1 from the maintenance menu. When prompted for a file name
prompt, enter the firmware image file name.
6.
Select option 7 to reset the switch and exit maintenance mode.
5.3.3
Maintenance – Reset Network Config
This option resets the network properties to the factory default values and saves
them on the switch. Refer to
values.
5.3.4
Maintenance – Reset User Accounts to Default
This option restores the password for the Admin account name to the default
(password) and removes all other user accounts from the switch.
5.3.5
Maintenance – Copy Log Files
This option copies all log file buffers to a file on the switch named logfile. You can
use FTP to download this file to the management workstation. You must download
the logfile before resetting the switch.
5.3.6
Maintenance – Remove Switch Config
This option deletes all configurations from the switch except for the default
configuration. This restores switch configuration parameters to the factory defaults
except for user accounts and zoning. Refer to
factory default values.
59042-08 A
Image filename: filename
Unpacking 'filename', please wait...
Unpackage successful.
Table B-16
5 – Diagnostics/Troubleshooting
for the default network configuration
Table B-9
though
Recovering a Switch
Table B-16
for the
5-13
Advertisement
Table of Contents
