Setting Up The Time Base - Fluke 867B User Manual

5 (Full Auto) selects the range, trigger level, and
time base automatically to produce an optimum
display of the waveform.

Setting Up the Time Base

Time > Single >
>
Base Trigger Shot
Select "Time Base" (1) from the View Mode
Softkeys, then use the Time Base Softkeys as
follows:
Slower Faster
2 (Slower) selects the next longer time per
division. More waveform activity then appears in one
time division, effectively zooming out on the
waveform.
3 (Faster) selects the next shorter time per
division. Less waveform activity then appears in one
time division, effectively zooming in on the
waveform.
5 (Exit) returns to the View display.
Glitch > Full
Capture Auto
Exit
Using View and Trend Display Modes
Setting Up the Time Base
4.2 μs
5 s
2 s 8.3 μs
1 s
20 μs
500 ms
200 ms
100 ms
50 ms
500 μs
20 ms
10 ms 1 ms
2
5 ms 2 ms
Slower
Figure 5-1. Time Base Selection
5
50 μs
100 μs
200 μs
3
Faster
rita0710.eps
5-3