5420F-48P-4Xe Switch Features - Extreme Networks ExtremeSwitching 5420 Series Hardware Installation Manual

5420F-48P-4XE Switch Features

Figure 11: 5420F-16W-32P-4XE Front Panel
1 = 10/100/1000BASE-T ports (Type 4
PoE (90W))
2 = 10/100/1000BASE-T ports (Type
2 PoE (30W))
3 = Mode button
The rear panel of the switch includes:
•
3 fixed fan modules
•
Grounding lug
•
1 AC power inlet connector
•
1 power supply slot
Figure 12: 5420F-16W-32P-4XE Rear Panel
1 = Grounding lug
2 = Fixed fan modules
5420F-48P-4XE Switch Features
The front panel of the 5420F-48P-4XE switch includes:
•
48 10/100/1000BASE-T full/half duplex (autosensing) MACsec capable ports with Type 2 PoE+
(30W).
•
4 1/10Gb SFP+ MACsec capable uplink ports (unpopulated)
•
2 Stacking/SFP-DD ports (unpopulated)
•
1 Serial console port (RJ-45)
20 ExtremeSwitching 5420 Series Hardware Installation Guide
Note
Half-duplex is not supported on these ports when operating at 1Gbps.
ExtremeSwitching 5420 Series Overview
4 = USB Micro-B console port
5 = 10/100/1000BASE-T out-of-band
management port
6 = RJ-45 serial console port
3 = AC power inlet connector
4 = Power supply slot
7 = USB Type-A ports
8 = SFP-DD stacking
ports
9 = 1/10G SFP+ ports