Cr Output Controls And Control Room Output Panel - Euphonix System 5B Operation Manual

System 5-B Digital Audio Mixing System Operation Manual
Output
085
Level (dB)
Output
Level Knob
Center Switch
turns CR Output
Control Room
On/Off
Dim
Dim Switch
drops the level by
the amount indicated
in CR Output Panel
Figure 5-4 CR Output controls and Control Room Output Panel
Dim and Cut
The Dim level can be set in the Control Room Output Panel by pressing the Dim key
on the panel viewer and using the +/- soft keys, or the output level knob. to adjust the
level. This is the reduction in level (dB) that occurs when the Dim switch is active.
The Control Room Monitors may be switched off/on by pressing the output level
knob's center switch or the Cut switch.
Monitors A–D may be switched off/on by pressing the output level knob's center
switch; they are off when their output level knob's center LED is not lit.
Press to display
Control Room
Output Panel
CR
LR phase
Output
L R
C Sl Sr B X Y
CR Source
Mix 1
CR
Source
Main
Spkrs
Alt1
Spkrs
Alt2
Spkrs
Cut
CR
Insert
Cut Switch turns
CR Output On/Off
Dim - 10
LR Phase
L On
C On
R On
Sl On
Sr On
Bm On
X On
Y On
Main
Panel
59
CM401 Master Section
Control Room Output
Mono
Stereo
LCRS
5.1
7.1
Info
+