Title Defaults; Updating Title Defaults Warning - Euphonix System 5B Operation Manual

System 5-B Digital Audio Mixing System Operation Manual
4.1.4

Title Defaults

This section describes how to set up basic PatchNet settings. This process includes
naming the device inputs and outputs and connecting group bus outputs to multitrack
inputs. The setup process is equivalent to setting and labeling the normalled connec-
tions on a conventional patch.
NOTE: To clarify the use of the terms Inputs and Outputs in PatchNet, Device per-
tains to equipment other than the System 5-B console. Therefore, Device In-
puts refers to inputs to an external device, not the console.
The following settings are stored to the Title Defaults and are automatically included
with each new Title:
• PatchNet settings and names
• Bus Setup: names and formats
• Externals Setup: names and formats
• SnapShots
• Layouts
• Meter setups
Setting the Title Defaults
The Title Defaults can be set by clicking the Set Title Defaults button on the Titles
page in PatchNet. This copies all settings listed above from the currently open Title into
the Title Defaults for the current Mixer Model. The warning in Figure 4-5 appears to
confirm this action.
Figure 4-5 Updating Title Defaults warning
36
eMix Application