Table of Contents
Advertisement
System 5-B Digital Audio Mixing System Operation Manual
Talk
To enable talkback functions:
1. Physically connect the S5's talkback mic to the MC524's Talkback 1 input.
2.
Physically connect the MC524's Talkback 1 output to a spare A/D input on an
AM713.
3.
In the Patch view, patch the A/D Source into the Utility Destinations/Slate-
TB_In.
Holding down the Talk key (located to the left of the Swap key above the fader) switch-
es the talkback mic into the channel's mix minus output.
122
Channels and Strips
Advertisement
Table of Contents
