Connecting Other Components; Connecting External Amplifiers - Yamaha RX-Z1 Owner's Manual

Hide thumbs Also See for RX-Z1:
Table of Contents

Advertisement

Connecting
external
amplifiers
If you want to increase
the power
output to the speakers,
or want to use another
amplifier,
connect
an external
amplifier
to the PREOUT/
MAIN IN terminals
as follows.
• When an RCA pin-plug
cable is connected
to the PREOUT
jack in order to output to the external
amplifier,
do not connect
speakers
to this
unit. If you do, the sound will be output from both speakers
connected
to the external
amplifier
and this unit.
o @@@
0
O
MAIN jacks
MAIN OUT jacks
Main channel line output jacks. The signals output through
these jacks are affected by VOLUME, BASS, TREBLE, and
BASS EXTENSION settings.
MAIN IN jacks
Line input to this unit's main channel
amplifiers.
When
connecting
to these jacks,
signals input to the preamplifier
of
this unit will not be output from the main amplifier
of this unit.
I_ CENTER jacks
CENTER OUT jack
Center channel line output jacks.
CENTER
IN jack
Line input to this unit's center channel
amplifier.
When
connecting
to these jacks,
signals input to the preamplifier
of
this unit will not be output from the center amplifier
of this unit.
I_) REAR CTR jack
Rear center channel line output jack.
I_ SUBWOOFER
jacks
Subwoofers reinforce very low frequencies.
MONO
Main, center and rear channel frequencies below 90 Hz are
output through this jack. You can also direct DTS and Dolby
Digital LFE signals to this output.
SPLIT
The SPLIT jacks output stereo separation for the main and rear
channels and a split mono signal for the center and LFE
channels.
Adjust the volume
level of the subwoofer
with the control on the
subwoofer.
Subwoofer
volume
cannot be adjusted
from this unit.
Depending
on the settings
in SET MENU
item "1 SPEAKER
SET",
some signals
may not be output from the SUBWOOFER
jacks.
I_ FRONT jacks
FRONT OUT jacks
Front effect channel line output jacks.
FRONT
IN jacks
Line input to this unit's front effect channel
amplifiers.
When
connecting
to these jacks,
signals
input to the preamplifier
of
this unit will not be output
from the front effect amplifier
of this
unit.
(_ REAR (SURROUND)
jacks
Rear channel line output jacks.
E-31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rav-2000z1

Table of Contents