Connecting A Satellite Tuner - Yamaha RX-Z1 Owner's Manual

• Connecting a satellite tuner
• Connect
the left and right analog signal output jacks on your satellite
tuner to the SAT @ and @jacks.
Connect the composite video signal
output jack on your satellite tuner to the SAT VIDEO jack.
• If your satellite tuner has an S-video output or component video output, you can connect it to this unit. Connect the S-video signal output
jack on your satellite tuner to the SAT S VIDEO jack or connect the component video signal output jacks on your satellite tuner to the SAT
COMPONENT VIDEO jacks.
• Connect the optical digital signal output jack on your satellite tuner to the OPTICAL SAT jack.
• Connect the coaxial digital signal output jack on your satellite tuner to the COAXIAL CABLE jack.
OPTICAL OUT
COAXIAL OUT
COMPONENTVIDEO OUT
ANALOG AUDIO
OUT
• When connecting the coaxial digital signal output jack on your satellite tuner, it is necessary to change the setting for the COAXIAL
CABLE jack of "8 I/O ASSIGNMENT" on the SET MENU in order to connect the digital audio signals to the CABLE jack and the video
signals to SAT jack (see page __).
E-25