Table of Contents
Advertisement
[_o_ij;Io_l_.,_ V'-I _. I m]_o,._ilI[O_.,._
•
Turning
on the display
Tap the screen gently with your finger or a blunt, soft
object like a pencil eraser.
The display is activated and the Home menu appears.
Tap the screen gently.
The Home menu appears.
• If the display
stays blank or becomes
black, adjust the contrast
using CONTRAST
+/- on the left side of the remote
control.
• If another
panel is displayed,
tap the Home
button.
• The remote
control
shuts down automatically.
•
Using the backlight
Press BACKLIGHT on the left side of the remote control.
The backlight shuts oil"after a few seconds to save power.
• In the settings, you can choose to activate the backlight automati-
cally when you turn on the remote control (see page __).
•
Activating
modes
The remote
control has different
modes.
When controlling
components,
the remote
control
should be set to
Use mode.
If a label (like _
or _)
appears
at the center top
of the touch screen,
see page __ for information
or switching
your
remote
control
to the Use mode.
•
Using touch screen
buttons
1. Sending
commands
By tapping
the touch
screen buttons
you send commands
to the
components
you have selected.
When you send a command,
the
control
icon indicates
that it is transmitting
signals
M.
The
remote
name of the active components
is indicated
on the device tab.
2. Scrolling
Most components
have more than one control
panel. You can scroll
through
these control
panels using _
and _.
The panel number
on the left (or right)
bottom
of the screen indicates
the active panel
number
and the total number
of panels,
for example
_.
By holding
down a scroll button,
you cycle repeatedly
through
all
the control
panels of a component.
•
Using the left/right
buttons
The left/right
buttons
change function
depending
on the component
the remote
control is operating.
The current
tunction
is displayed
on
the touch
screen right above the button.
The tunction
can be an IR
command
which is transmitted,
or a jump
to a specific
component
page.
•
Using the direct-access
buttons
You can operate this unit with the direct-access buttons (POWER,
STANDBY, MUTE and VOL +/-) at any time, even without turning
on the touch screen.
E-10
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
