Basic Recording - Yamaha RX-Z1 Owner's Manual

REC OUT/ZONE 2 allows you to record one source while viewing and/or listening to another source.
2
_Turn on the to this unit and all connected
power
components.
_ Select the source want to record
component you
from by using REC OUT!ZONE 2.
SOURCE/REMOTE
O-TV/J.D ! • IOVD
cAs,. • • ,, _/TA_
sl ,• •c ,=R
VC_v__
_• •T r_ER
VCR3/pyre• "_ •PHONO
VlOEO AUX"
REC OUT/ZONE 2
To record the current input source that you are watching or
listening to, set REC OUT!ZONE 2 to SOURCE/REMOTE
To record the other source than the one that you are watching
or listening to, set REC OUT!ZONE 2 to the source you want
to record.
_ Start (or select a broadcast station) on the
playback
source component.
_ Start recording on the recording component.
• Do a test recording before you start an actual recording.
• It is not possible to record the sound effect created by this unit's
DSP processing.
• When this unit is set in the standby mode, you cannot record
between other components connected to this unit.
• Operating BASS and TREBLE, BASS EXTENSION, BAL-
ANCE, VOLUME, and DSP programs do not affect the recorded
signal.
• Setting REC OUT!ZONE 2 to SOURCE/REMOTE and using
the BGV function (see page _) allows the recording of audio and
video from a different source.
• Use INPUT SELECTOR to switch the source from the one you
are watching or listening to while making recording with REC
OUT!ZONE2 set to the source component you are recording
from.
• A given input source is not output on the same REC OUT
channel. (For example, the signal input from VCR 1 IN is not
output on VCR 1 OUT.)
• S-video and composite video signals pass independently through
this unit's video circuits. Therefore, when recording or dubbing
video signals, if your video source component is connected to
provide only an S-video (or only a composite video) signal, you
can record only an S-video (or only a composite video) signal by
your VCR.
• DIGITAL OUTPUT jacks and analog OUT (REC)jacks are
independent. Only digital signals are output from DIGITAL
OUTPUT jacks and analog signals from OUT (REC) jacks.
• A source connected to the 6CH INPUT jacks of this unit cannot
be recorded.
• The LD rlrl RF (AC-3) input signal cannot be output using REC
OUT!ZONE 2.
• Check the copyright laws in your country to record from records,
CDs, radio, etc. Recording of copyrighted material may infringe
copyright laws.
• Special considerations when recording DTS
software
The DTS signal is a digital bitstream. Attempting to digitally record
the DTS bitstream will result in noise being recorded. Therefore, if
you want to use this unit to record sources that have DTS signals
recorded on them, the following considerations and adjustments
need to be made. For LDs, DVDs and CDs encoded with DTS,
when your player is compatible with the DTS format, follow its
operation instruction to make a setting so that the analog signal will
be output from the player.
E-56