Table of Contents
Advertisement
Select "TEST
DOLBY
SUR." to match
the output levels of the center, rear center and left and fight rear speakers
to the left and fight main
speakers.
_Tap
on the PARAMETER
control
panel.
"TEST
DOLBY
SUR." appears
on the video monitor
and front
panel display.
G"i'h"'i" I',_'H i"_il ;"ii_
i
i=
=,
i
illll
i%'t
=,
,
LEFT
•'i"r"i"'"i"
r',,i"il
r"il
i
i"i
ir"i
i i:::. 2, i
i,,* =U i,.i:::= ' i'2, U r=:.,
i
r"
r" "i
i,. i:7 r" i
The test tone is produced
from the left main speaker,
center
speaker,
fight main speaker,
fight rear speaker,
rear center
speaker
and left rear speaker
in order. The tone is produced
for
2.5 seconds
each time. You can also select the speaker
to be
adjusted
by tapping
@
or _.
• Speakers
whose settings
are set to "NONE"
in "l SPEAKER
SET"
(except
for "IA CENTER
SP") on the SET MENU
will
be skipped
and no test tone will be output.
• You can also enter the TEST DSP SUR. mode
by tapping
on the SET MENU
control panel. However,
the
adjustment
cannot be made by tapping
@,
_,
_
and
on the SET MENU
control panel.
_
Adjust
VOL +/- so
can hear the test tone.
you
• If the test tone cannot
be heard,
turn down the volume,
set
this unit in the standby
mode
and check the speaker
connec-
tions.
Tap/,_J or _ repeatedly
to adjust
the output
level of
the effect
speakers
so that the output
level coming
from each speaker
is the same.
Each speaker
level can be adjusted
in the range of-10
to +10
dB.
While adjusting,
the test tone is heard from the selected
speaker.
• If "IA CENTER
SP" on the SET MENU
is set to "NONE",
the center channel
sound is automatically
output from the left
and fight main speakers.
• If "ID REAR CT SP" on the SET MENU
is set to "NONE",
the output level of the rear center speaker
cannot be adjusted
in step 3.
• Main L/R speaker
level cannot
be adjusted
by itself. Use
VOLUME
to adjust the main volume.
Tap
to enter the TEST DSP mode.
Tap
again to stop the test tone and the DSP program
name appears
on the front panel display
and the video monitor.
• The tonal quality
of the speakers
can be adjusted
using the "4
CENTER
GEQ",
"5 REAR CT GEQ",
and "6 CINEMA
EQ"
items in the SET MENU
(see pages __ to __).
• You can increase
the output levels of the effect channels
(left rear,
right rear, rear renter
and center)
to + 10 dB. If the output level of
the center, rear, and rear center speakers
is lower than that from
the main speakers
even after you have increased
the sound volume
level of the center, rear, and rear center speakers
up to +10 dB, set
the "IG MAIN LEVEL"
item in the SET MENU
to "-10dB".
Setting the "IG MAIN LEVEL"
item to this setting decreases
the
main speaker
volume
level to about
one-third
the normal
level.
After you set the "IG
MAIN LEVEL"
item in the SET MENU
to
"-10dB",
adjust the levels for the center, rear, and rear center
speakers
again.
• The adjustment
of output levels of the center speaker,
and left and
right rear speakers
is also effective
to the speaker
output level
during
the playback
of the source connected
to 6CH INPUT jacks.
E-39
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
